Page 4 sur 6

Re: pas mopar mais......

Publié : 25 avr. 2016, 09:31
par Banshee
COUDA a écrit :Un peu pareil en Mopar:http://www.reachoo.com/ads/55862258?trv ... gn=Premium
elle est bien malade aussi :(

Re: pas mopar mais......

Publié : 25 avr. 2016, 15:22
par scoubis
Banshee a écrit :
COUDA a écrit :Un peu pareil en Mopar:http://www.reachoo.com/ads/55862258?trv ... gn=Premium
elle est bien malade aussi :(
moins que la mienne :D :D

Re: pas mopar mais......

Publié : 26 avr. 2016, 10:18
par enoss
Banshee a écrit :
COUDA a écrit :Un peu pareil en Mopar:http://www.reachoo.com/ads/55862258?trv ... gn=Premium
elle est bien malade aussi :(
et à 19500$ :violin:

Re: pas mopar mais......

Publié : 26 avr. 2016, 10:24
par scoubis
enoss a écrit :
Banshee a écrit :
COUDA a écrit :Un peu pareil en Mopar:http://www.reachoo.com/ads/55862258?trv ... gn=Premium
elle est bien malade aussi :(
et à 19500$ :violin:
Ça calme.... :o

Re: pas mopar mais......

Publié : 27 avr. 2016, 07:10
par scoubis
Voilà c'est fait .... la voiture est dans mon garage

Re: pas mopar mais......

Publié : 27 avr. 2016, 07:21
par scoubis
Zut.... les photos sont dans le désordre.....
en meme temps j'en ai profité pour ramener ça ::

Re: pas mopar mais......

Publié : 27 avr. 2016, 07:26
par scoubis
le moteur est un 350 ....le même que la camaro ....le moteur est equipé au gaz

on récupère la mécanique et on jette le reste ...y a plus rien de bon ...

Re: pas mopar mais......

Publié : 27 avr. 2016, 13:41
par scoubis
j'ai décodé le trim tag, bonne surprise, c'est une SS /RS :D , voila ce que ça donne :


Trim Tag Decoder:
Decode of your 1967 Camaro Trim Tag:
01= January, 1967, the month car was built.
E= Fifth week of the month.
12667= Deluxe interior convertible body style type.
NOR= Vehicle was assembled at the Norwood, Ohio assembly plant.
80563= Unique body sequence number assigned at the assembly plant.
797= Deluxe Parchment bucket seat interior.
Z= Bucket seats without headrests.
E= Deepwater Blue lower body paint color.
2= Black convertible top convertible top color.
Breakdown of Group 1 Options:
X= A31 Power assisted electric windows. Cost $100.10, total production = 4,957.
L= A67 Folding rear seat. Cost $31.60, total production = 17,993.
D= C06 Power convertible top. Cost $52.70, total production = 11,783.
Breakdown of Group 2 Options:
L= M20 4-speed manual wide ratio transmission. Cost $184.35, total production = 45,806.
G= D55 Console with floor mounted shifter, storage compartment, rear seat ashtray and courtesy light. Cost $47.40, total production = 129,477.
Breakdown of Group 3 Options:
L= Z22 Rally Sport Package including Z21 option plus full width grill with concealed headlights, bright lower body side moldings, RS grille emblem (or SS when options combined), parking/turn signal lights located below front bumper, reverse lights located below bumper in rear. Cost $105.35, total production = 64,842.
Breakdown of Group 4 Options:
P= L48 Super Sport with base 350cid, 295hp 4bbl V-8 engine. Cost $210.65, total production = 29,270.

*Note: On Norwood built Camaros the 4P code may indicate that the vehicle in question was either equipped form the factory with an L30 275hp 327cid engine and 4 speed manual transmission (L under group 2 options) or for the RPO L48 295hp 350cid SS option.
Breakdown of Group 5 Options:
B= V32 Rear bumper guards. Cost $9.50, total production = 35,029.
O= O Seat belt delete, export only. No other information currently available. Cost $0.00, total production = 0.
Breakdown of Special Order/Fleet Code:
031K= Code indicating special order vehicle or fleet purchase order. Contact us with your vehicles trim tag information and we will try to help you find what it was ordered as or for.

Re: pas mopar mais......

Publié : 27 avr. 2016, 14:01
par VINCENT
Au vue du décodage c'est une voiture exceptionnelle, courage pour la suite ce ne sera que la 3ème que tu sauves des cendres (pire que la rouille) :clap:

Re: pas mopar mais......

Publié : 27 avr. 2016, 14:22
par scoubis
VINCENT a écrit :Au vue du décodage c'est une voiture exceptionnelle, courage pour la suite ce ne sera que la 3ème que tu sauves des cendres (pire que la rouille) :clap:
Elle est pas encore sauvée mais on va s y mettre !!! :wink:

Re: pas mopar mais......

Publié : 02 mai 2016, 11:21
par scoubis
le démontage est attaqué

Re: pas mopar mais......

Publié : 02 mai 2016, 11:22
par scoubis
pas de gros soucis de rouille a part ça :

Re: pas mopar mais......

Publié : 02 mai 2016, 11:23
par scoubis
l’arrière quant a lui est impeccable !!

Re: pas mopar mais......

Publié : 02 mai 2016, 11:24
par scoubis
le plancher du coffre est a remplacer .....

Re: pas mopar mais......

Publié : 02 mai 2016, 11:25
par scoubis
le plus gros boulot c'est ça :

là, faut changer le plancher complet ....